How to Frame A Canvas Print - Azatta

How to Frame A Canvas Print

After you buy an expensive wall painting, it automatically becomes imperative to protect it from external vulnerabilities in order to ensure that the art remains intact for as long as it possibly can. To achieve this, it is important to frame canvas print, regardless of the additional expenses that you may have to bear.

When it comes to framing, there are several ways to get the job done irrespective of the type of canvas print that you have purchased from local store or online shop. However, the methods to frame each type of photo print may vary, depending on the condition of the painting, the quality of the color used to complete it, how old the images printed is, and especially, how was it handled earlier in hanger bolt.

That said, here you will learn the benefits of framing such classy images, how to frame canvas print, and what are the best practices that you may want to follow to get decent and everlasting results.

frame canvas artwork

Part 1: Advantages of Framing Canvas Art

When the phrase ‘frame canvas print’ is talked about, it means that you are in the process of protecting the exclusive artwork, while adding some cosmetic values to it at the same time. The overall look that a complete framed painting you will end up having will depend on the type and quality of the frame you used.

Some of the advantages of having your costly canvas art framed include:

  • No Information Loss

When you get your canvas print framed, because the borders are wrapped around the painting itself, the entire picture remains visible when it is put (installed/hung) on the wall of your room.

  • Less Weighted

Because the canvas arts weigh less, even the frames that are wrapped around their edges remain lightweight. This makes the prints easy to carry and hang on the walls without any hassle.

  • Improved Appearance

A framed canvas art gives a traditional look and makes your walls appear decent and classy.

  • Well-Suited Accent

If you are using a wooden frame that has been fine-molded, the painting would gel up with the walls to provide a decent cosmetic accent to your room.

  • Color Significance

If a photo print is in black-and-white color, a contrasting lighter or darker shade of the frame would give the overall artwork an unmatchable appearance.

Part 2: 7 Procedures of Framing a Canvas Print

If you do not wish to give your canvas art to any random vendor for framing, the best alternative would be to frame canvas print yourself. The two common canvas frame types are:

1. Using Wooden Stretcher (with the Keys)

This especially works in the case when you have bought a rolled canvas print. Because such paintings need to be straightened before they can be framed, the most convenient solution would be to grab a pre-assembled wooden stretcher with the supporting Keys. This type of setup is easily available in the market.

As an alternative, you can even get the separate (dissembled) pieces of correctly crafted wood and assemble a frame on your own. The keys are used to provide extra tension to the painting so the roll-marks are removed, and the photo print looks straight when framed.

wooden frame

2. Using Floating Frame

If you want some extra border around your canvas print, you can get a floating frame options for the images printed. When you use this type of framing, the edges of the print look as if they are floating between the frame due to the gap that is present between the borders and the artwork.

Whether you plan to frame canvas painting using the first border type or the second one, the procedure that must be followed to get the job done is almost identical and is listed below:

Step 1: Get Correct Measurement

Make sure to calculate the correct height and width of the works of art, and order a frame that matches the size. If you wish to use a stretcher frame, or wooden screw, consider getting the one that is a bit smaller than the actual painting so the image can have a sufficient amount of tension.

Step 2: Correct Positioning

Clean your work table, i.e., the workplace where you want to perform the framing process. Next, place the frame facing its main (front) side downward. Make sure that the position of the framed canvas artwork on the table is straight, and isn’t uneven.

position of frame artwork

Step 3: Place the Painting Inside the Frame

Grab the image, and place it inside the frame facing its painted side downward. Ensure that the painting fits perfectly on the inner lip of the frame with machine screw threads.

canvas painting frame

Step 4: Attach the Painting with the Frame

Slide the pointed side of one of the canvas clips onto the frame where its edge meets that of the painting itself. Next, pull the canvas clip so it comes above the stretcher, and then press it down for firm fixation. Repeat the process for the remaining three sides of the frame.

Step 5: Mark the Points and Make Room for the Screws

The screws are usually placed at the center of the two corners of the frame border and are important to ensure that the painting is properly stretched and that it is firmly attached to the borders.

To use the screws, place a canvas clip at the center of a frame border, use a pencil to mark a point where the screw is to be tightened and then remove the clip for now.

Next, use a pointed object, typically a lightweight drilling machine, and create a pilot hole right on the marked point on the frame border. Repeat this process for the remaining borders of the frame.

framed artwork

Step 6: Tighten The Clips with Screws

Grab a canvas clip, and place it on the frame border making sure that the screw hole on the clip is right over the pilot hole on the border. After this, place a screw over the clip, and use a screwdriver to tighten it to firmly fix the canvas clip to the frame. Repeat this process for the remaining sides as well.

Step 7: Attach Hanger Screws

Make sure that the frame is placed facing downward, and that the frame border you want to attach the hanger screws is the one that holds the top area of the painting.

Use a scale to measure 1/4th (25%) of the horizontal distance from the right corner of the top border, and is at its vertical center. Use a marker to mark this spot. Do the same for the left side of the frame border as well.

Next, attach the hanger screws on both the marked spots. Now, grab a strong string, and tie each of its ends to the hanger screws you attached. Finally, carefully turn the canvas art over, and hang the frame on a wall of your room.

hanging framed canvas artwork

Part 3: Tips About Framing a Canvas Print

A couple of important points that you may want to consider when you frame canvas print include:

  • Color

The color of the frame you want to put your painting in must be in contrast with the shades the image has. This will make the artwork stand out, and become prominently visible.

  • Material

Depending on the type of artwork you have, the material of the frame may vary. For instance, if it is an ancient portrayal, molded wooden borders would do good. On the other hand, for some stubborn depictions, a metal frame would serve the purpose well.

  • Style

The frame style you want to have may vary as per the painting and your preference. For example, if it is a rolled canvas print, using a stretcher frame with the keys would be useful. Likewise, if you want to give your painting a bordered appearance, a floating frame would be your best bet as it would create a floating illusion about the artwork due to the gaps between the picture and the borders.

framing canvas artwork

Part 4: Summary

To frame canvas print, a lot of things must be kept in mind. While the two frame types are ‘stretcher’ and ‘floating’, the procedure of framing your classy artwork inside either of the borders is almost identical.

However, in any case, it is imperative to consider that the color of the frame remains in contrast with the shades the painting has. The material of canvas frame that Azatta used is made up of is of good quality and can gel in with the ambiance of the depiction, and the style of the borders of the frame must be appropriate to ensure the durability of the print.